Best Pool cover Pump – Complete Buyer’s Guide & FAQ

Winters can be very harsh on our homes. Pool maintenance is important during cold seasons and we all need to take precautionary measures for that. Protecting your pool during winters means that you need to have the right kind of tools at hand. Shop in for the best pool cover pump for your pool maintenance. Pool maintenance protects pools during harsh seasons and in the long run, it saves you money. Keeping a pool neat and tidy is something that we all want to achieve, so even if it seems that investing in a pool cover pump is a bit over the top, it actually is pretty essential for your pool’s overall maintenance.

As compared to other maintenance tools, once might argue that the buying a pool cover pump is pretty expensive, but if you take into account their functionality and life-long service that they can provide, you would be bound to think otherwise. Taking these factors into account, you will actually realize that you will be saving a lot of money in the long run because you don’t have to invest in any extra pool cleaning and maintenance. There are many feasible pool cover pumps available in the market which won’t burn a hole through your pocket.

List of the best pool cover pump 

ImageBrand ProductRate of flowTypeDetails
Superior Pump 91330 Pool cover PumpSuperior 91330 Pump2400 GPH Manual
Wayne 57729-WYNP Pool Cover PumpWayne WYNP 57729 3000 GPH Automatic
Fibropool Electric Pool Cover PumpFibroPool Cover600 GPH Manual
Little Giant PCP550 14942702 Pool Cover PumpLittle Giant 14942702 PCP550 550 GPHManual
Ocean Blue 195091 Pool Cover PumpOcean Blue Electric 195091350 GPHManual
Little Giant Pool Cover PumpLittle Giant's 577301500 GPHAutomatic
Pool Cover PumpLittle Giant Submersible 51200 GPHAutomatic and manual
Yescom Pool Cover PumpYescom Subersible 3432 GPHAutomatic
Superior Pump 92341 Pool Cover PumpSuperior 92341 Pump 2760 GPHAutomatic and manual
Blue Wave NW2300 Pool Cover PumpBlue Wave Above Ground NW2300350 GPH Manual
Rule A53 Series Pool Cover PumpRule A53 Series 18001800 GPHAutomatic
Pumps Away BS 27316 Pool Cover PumpPumps Away Submeresible350 GPH Manual

Points to consider while buying a Pool Cover Pump

Most of the best-selling pool cover pumps come with a few common features. The only differences lie between the basic designs and certain operations. The main things that you need to consider, before buying a pool cover pump are the size of the pool you have and the kind of climate zone you live in, as weather conditions would decide the kind of model you should go for.

There are two kinds of swimming pool cover pumps- automatic and manual, but some pumps come with both features. This is a very good feature as you can make use of the cleaning process even if you’re not around.

The flow intake of a pool pump is the main factor that decides its efficiency. It is measured in gallons/hour. If the flow rate of a pump is high, you can bracket it in the list of best pool cover pumps. A medium price-range pump with a flow rate of around 600 GPH is good and powerful enough. This kind of pump is also easy on the environment as its energy efficiency helps in reducing electricity usage and helps you save money in turn.

The dynamic head of a pump is the total amount of pressure that is experienced by the water system of the source while water passes through the pump. Many companies specify the dynamic head numbers of a pump. If the vertical rise is high for the pump, the flow rate, being indirectly proportional to that, will decrease. A regular pump might be capable of making use of a lot of water at zero feet of head discharge but if there is a reduction in friction during this movement, the flow rate will be reduced and the dynamic head will increase. That way, a 3000 GPH pump will work at just 900 GHP if the discharge occurs at 9 feet height.


Reviews of the Best Pool Cover Pump

The Superior Thermo 91330 1/3 – Best Pool Cover Pump

Superior Pump 91330 Best Pool Cover Pump


This is a very useful and versatile pool cover pump. It collects the excess water steadily and also helps in the filtration of dirt, leaves, and other debris. The Superior Pump 91330 is a utility pump that is submersible by nature and it can handle huge amounts of water from the top of pool covers. It also works in basins, slurring, and working sites.

This is a very durable model and gives a constant pumping action because of the presence of its special split capacitor which is made of copper. The motor can take 1/3 HP of output and it comes with very durable shaft shielding guards and is resistant to high heats.

The pump can reach a maximum flow rate of 2400 GPH and in medium condition, it works on 2040 GPH if the height is five feet. This brings in a sort of uniformity in the flow and overall application. The pup is made of thermoplastic which protects the machine even better. The pump comes with a strainer under it which doesn’t let debris enter the interior regions of the motor. This avoids clogging.

Apart from all this, the pump will also work just fine in drains which are 6 inches deep and can be used with the hose it comes with. If a float switched is set up to it, it can also work as a pool cover sump pump This is useful if your basement is flooded.

Main features of this pool cover pump

  • It comes with a 1/3 HP powerful motor system
  • It gives a maximum flow rate of 2400 gallons per hour
  • The power cord is ten feet long
  • It comes in a sleek black-colored design
  • It is very lightweight as is just around 8 pounds
  • It has an adaptable intake and even if used vertically it doesn’t affect the flow rate
  • The output of the motor is impressive as well

The Wayne WYNP WAP 250 57729 Best Pool cover pump

Wayne 57729-WYNP Best Pool Cover Pump


Like most modern models, the Wayne WAPC250 is made of thermoplastic. This means it is a submersible model and comes with an automated activating system which detects the water level on its own.

This pump comes with an iSwitch technology which helps in automatic draining. The excess water on the surface of the pool cover is detected on its own and it does the necessary work, thereafter. You don’t have to stand around your pool and wait to adjust the settings according to the water levels. The pump will also switch itself off when all the water is drained. So, this means that you can leave it on and go about your other work. The motor is a PSC-oil-filed motor that comes with an impeller with centrifugal technology. This ensures a very high flow rate. This technology helps the user save money on their electricity bills as well as it doesn’t exert too much power, which in turn, is good for the environment as well. It comes with a freeze protection system that is automated and it helps protect the machine during harsh temperatures if freezing, cold weathers. There is a protective shield around the inner circuit as well to give the motor extra fortification. If this isn’t there in a model the locked impeller can damage the system.

The impeller can sometimes get clogged due to dirt leaves and other debris. If this happens, the Wayne WAPC250 is designed in such a way that it will automatically shut down. Clogging doesn’t happen much with this machine because the motor comes with a special screen for suction which keeps the debris out of the inner system itself.

The power cord is of twenty-five feet and it is very useful for pools of any size. You can use it to plug it in wherever needed and it will always reach your pool wherever needed. Also, you don’t have to invest in extra extension cords for this. It also has a rope that can help you bring back the pump to the side easily.

The flow rate of this pump is around 3000 GPH during maximum capacity. The steady flow rate is around 2350 GPH if the dynamic head is at five feet height.

The discharge hose of the pump is a 1-1/4th inch hose which is connected to a valve to the garden hose 3/4th inch and it’s connected to that through an adapter. Always make sure to plug in the system in a ground fault interrupter circuit outlet.

Main features of this pool cover pump

  • It has a ¼ HP motor
  • It gives a maximum flow rate of 3000 gallons per hour
  • The power cord is of 25 feet]it comes in a beautiful blue color and weighs just around 10 pounds
  • It has an automatic motor system
  • It has amazing flow speed
  • The discharge connection is flexible in nature
  • The cord is easy to use
  • It helps in saving on electricity bills

The FibroPool Winter Pool cover pump

Fibropool Electric Pool Cover Pump


As the name suggests, this is a basic modern pump, built especially for winter months. It is highly resistant to rusting and doesn’t allow the growth of mold and mildew.

This model stands apart from other models because it is very durable and sturdy, it’s built for heavy-duty performance and it’s made of a lightweight but very strong thermoplastic casing called Fibre Pool. Fibre Pool ensures a long service without causing any problems in performance. It also is very much resistant to rust and other damages that might occur due to harsh weather conditions.

The in-ground pool cover pump is designed in such a way that it is highly resistant to cold temperatures. Hence this can act as the perfect winter above ground pool cover pump for you. It can also work well if your region has heavy rainfall. This model can be used to clear up areas clogged with water from rains or melted snow. It has a maximum flow rate of 600 GPH and has a steady drain action which gives off a very reduced head drop. You can also make use of the manual shut off button if in any case there is excessive clogging or overheating. It comes with a sixteen-foot-long hose and the apparatus is easy to install and use. You don’t need to buy any additional accessories

Main features of this pool cover pump

  • It has a maximum powerful flow rate of 600 gallons per hour
  • It runs on a motor of 1/10 horsepower
  • It is lightweight weight just about 4 pounds
  • It comes a black color and it is strongly made of corrosion-resistant material
  • It has a powerful filtration system
  • The head drop is almost zero at all times and it provides stable movement and flow
  • It is compatible with various hoses

The Little Giant 14942702 PCP550 Swimming Pool Cover Pump

Little Giant PCP550 14942702 Swimming Pool Cover Pump


This a medium-priced, durable swimming pool cover pump which also works great on small reservoirs. The motor works on a power of 1- 1/50 horsepower which enables the motor to work well in not just removing water from pool covers, but some other actions too.

There is a mesh screen on the side of the automatic pool cover pumpwhich catches leaves, solid materials, and debris of various kind and doesn’t allow it to enter the internal structure of the pump. You can take off this mesh when needed and clean it.

The pump would be categorized as a mid-range pump and it gives about 5500 gallons of flow rate in each hour. When the height is at 3 feet, it will give a flow rate of 400 GPH.

This is a pretty light model and made of sturdy thermoplastic. It is easy to use and lift and can be moved around wherever necessary. The model comes with a power cord of twenty-five feet which is very useful as the pump itself can be kept far away from electrical outlets.

You can store the pump easily anywhere as it’s under 6 inches in height and 7 inches in breadth. It is around 3 inches in length. This automatic pool cover pump will work well with basic 3/4th garden hoses.

This pump is basically designed for use during the winter months. The mixture of the features like its small size, yet powerful flow rate and its thermoplastic makes it durable and resistant to cold weathers. It also has a great energy exchange rate.

Main features of this swimming pool cover pump

  • This pump’s motor works on 1- 1/50 horsepower
  • It gives a maximum flow rate of 550 GPH
  • It comes in a black finish
  • It is very light and weighs just around 3 pounds
  • Head dropping is easy
  • The motor power is strong, in spite of its small size
  • It is best for places which have freezing, cold winters

The Ocean Blue Best Pool cover pump

Ocean Blue 195091 Best Pool Cover Pump


The Ocean blue genius water pump cover is made specially to work in the winters. This is a pump which has many functions apart from draining excess water and it can be used in both indoor and outdoor pools, basins and even man-made small reservoirs.

It has a single-speed motor system, which can handle a balanced water inflow. The pump also uses very less energy hence, helping you save money as well. The maximum flow rate is 350 GPH. It gives off very less to no head drop and can be used for hours at a stretch.

Under the main machine, a mesh is provided to catch leaves, twigs, dirt, and other debris even if the water contains a large number of solid contaminants. The foundation is sturdy as well. This model works with basic garden hoses and you’ll also get a twenty-five-foot-long power cord.

Main features of this pool cover pump

  • It has a motor running on 0.03 horsepower and gives a maximum flow rate of 350 gallons per hour
  • It weighs just 3 pounds and comes in a blue color finishing
  • It is a submersible model
  • It is multi-functional and has a stable filter system

The Little Giant 577301 Swimming Pool Cover Pump

Little Giant Swimming Pool Cover Pump

Little Giant models are all very good when it comes to pool cover pumps. The APCP-1700 is designed to work under extreme weather conditions and it’s fully automated. It is submersible and can handle a large amount of rainwater puddles and snow melts even if its stagnant water containing a lot of debris. This is a very efficient model and because of its automatic shut-off technology, it helps in maintaining a good and action depending on the amount of excess water present in the puddle. You can make use of the pump even in water which is just two inches deep. Set it close to the puddle and leave it out to do its magic.

This model comes with a wide surface underneath which ensures better stability and grip. It also comes with an FNPT side hose (one inch thick) which can ensure good discharge when placed horizontally. The base also has a mesh that filters out harmful debris from entering inside the machine. You can take it out and clean it separately. It is made of polypropylene material. The pump works with a 3/4th garden hose but you can also use the FNPT tube. It has a maximum flow rate of 500 GPH and can work at a head of 23 feet as well. Rainwater can be removed all at one go.

Main features of this swimming pool cover pump

  • It has a flow rate of 500 gallons per hour, in a maximum state
  • It has a cord of 25 feet
  • It has a powerful motor running on 1/3 horsepower
  • It comes a beautiful blue color and weighs about 13 pounds
  • It is submersible in nature and has a great head stability
  • It works with 115 volts power input
  • It is fully automated

The Little Giant Automatic – Best Pool cover pump

Little Giant 5-APCP 505600 Best Pool Cover Pump

Like most little giant pool pump models, the -APCP also is a submersible model and is completely automated. It also is equipped with a manual backup system. You can work with it in automatic mode or manual mode and deactivate it when needed. You might need to manually handle it when it needs better control for the processor. This pump can work on water levels of even 2 ¼ inches deep and more. It can handle large amounts of water and can reach a flow rate of 1200 GPH in the maximum stage if the head is around 1 foot in height. It can handle basic rainwater and snowmelt as well.

Main features of this pool cover pump

  • It has a great flow rate of 1200 gallons per hour
  • It runs on 1/6 horse-powered motor
  • It weighs around 11 pounds and comes in a pale blue color
  • It also comes with a 25-foot cord
  • It has a stable base and you can manually handle and remove the automatic switch when needed
  • The flow rate maintained is very stable with almost no head drop
  • It can work in small puddles very well

The Yescom Heavy Duty Pool cover pump

Yescom Pool Cover Pump


This is a very sturdy pool cleaning pump. It is used to remove water in various spaces like shallow or medium kinds of water bodies like basements, ponds, and pools. The machine is designed in such a way that it can handle a constant flow of discharged water for hours at a stretch no matter how and where its placed. It has a well-insulated, powerful motor system which is completely submersible with a maximum head lift of twenty-six feet.

It has a removable automated activating system which means you can leave the pump on top of the cover for hours and you don’t have to hang around to get anything done. It is good in filtering debris and dirt because it comes with a mesh system underneath. Hence you can use this pump to clean murky mud water as well.

The motor of this machine is extremely powerful but doesn’t make noise even if it’s not submerged. It can be compatible with multiple kinds of hoses like 1-inch ones, the basic garden hose, the G 1- ½ and basic 1- ¼ hoses as well.

Main features of this pool cover pump

  • It has a powerful maximum flow of 3432 gallons per hour
  • You get a 25-foot power cord with it
  • It comes in a blue and black colored design
  • Its motor works on 1 horsepower
  • It weighs less than 13 pounds and comes with an automated shutdown system
  • You can use it to drain and fill ponds
  • It’s very versatile

The Superior 92341 1/3 Best Pool cover pump

Superior Pump 92341 Best Pool Cover Pump


If you are looking for a durable, fully submersible pump, the Superior Pump 92341 is a great choice. It has a maximum flow rate of 2760 GPH and can work at a vertical drop of even twenty-five feet. The pump system is automated which means it can detect the water level and start and stop on its own. You can also manually control the machine with a special removable power plug. The top of the machine is made of cast iron which ensures high resistance and stability. It has a stainless-steel impeller and has a great filtration system to keep the insides of the machine clean. The seals of this model are specially made of stainless steel as well and the O-ring seals protect the inner chambers of the motor. The motor can be used for many functions by using the split capacitors. The machine supports a hose of 1- ½ inch NPT hose if the higher flow is required. A large amount of debris, even 3/8th of inch-big debris can be filtered.

Main features of this pool cover pump

  • It runs on a 1/3 horsepower motor and gives a maximum flow rate of 2760 gallons in an hour
  • It has a black finishing
  • It comes with a ten-foot-long cord
  • It is versatile in nature
  • It weighs under 17 pounds
  • It has a sturdy cast iron design
  • It can work for hours without getting damaged
  • It gives a high flow rate

The Blue Wave Jr. 350 Pool cover pump

Blue Wave NW2300 Pool Cover Pump


Made by dirt defender company, the blue wave junior pool cover pump is designed to not only clear off unwanted water from pool covers but it also got an excellent debris filtration system. It is completely submersible and it is very energy efficient. It can handle huge amounts of water without interruption and it has a maximum flow rate of 35-0 gallons. You can manually activate and stop it when you want it to work on the removal.

This is a lightweight pump but very sturdy in nature. The machine is coated with special thermal protectors and the intake base can be screened and reset as many times as you want. It is built well to sit stably over the pool cover and it also comes with a long cord for maximum ease. It is compatible with garden hoses.

Main features of this pool cover pump

  • It comes in a sleek, black design
  • It has a maximum flow rate of 350 gallons per hour and runs on a motor of 0.29 A
  • It comes with a 25-foot cord
  • It weighs less than 3 pounds
  • The model is very stable and completely submersible.
  • The interior parts are heat and weather resistant

The Submersible A53 Rule Pool Cover Pump

Rule A53 Series Rule Pool Cover Pump


The A53S series is made for home use and it is completely submersible. Its best feature is a computerized switch off the system. You can use it in saltwater and freshwater, both and both and hot and cold water can be endured by this pump. It is made of thermoplastic material which makes it resistant to common wear and tears, weather conditions, and rust. A magnetic motor is present with the motor which works up a power of 100 watts. It is a water-cooled permanent magnet. All this is there but the system is absolutely noiseless. The vibration is gentle as well.

The pump can work even in puddles as deep as 1 inch and you don’t have to do anything- it is all automatic.

Under the main machine, there is a detachable mesh screen that keeps away debris and dirt from entering the main chambers inside. You can also use this machine to remove water in backyards, basements, storm drains, spas, and gardens.

Main features of this rule pool cover pump

  • It runs on a 1 horsepower motor
  • It has a GHP of 1800 in maximum flow
  • It comes with an 8 ft/24 ft power cord and is very lightweight. (under 3 pounds)
  • It comes in a white finishing and is fully automated
  • It is small and compact and highly environment friendly
  • It can work at very low water puddles
  • It has a long power cord
  • Can be manually shut down if overheating or clogging happens.
  • Energy-efficient and compact
  • Long power cord
  • Shuts off in case of clogging
  • Sensitive to the lowest water levels

The Pumps Away Swimming Winter BS 27316 Pool Cover Pump

Pumps Away BS 27316 Pool Cover Pump


With a quirky name and affordable price, the pumps away BS 27316 model is a good pump model to go for in order to drain excess pool cover water during the winters.

The pump can handle submersible and non-submersible water puddles. It can get a flow rate of a maximum of 350 GPH and it also comes with manual control which can help in making the duration as much as you need. The screen guard comes with a sponge as swell which allows only clear water to pass through, leaving all the debris behind. This pump takes less amount of power to run, hence helps you save money and is easy on the environment. It supports basic garden hoses and is very easy to install and clean off.

Main features of this pool cover pump

  • It is environment friendly
  • Comes in black color
  • It has a maximum flow of 350 gallons per hour
  • It has a motor running on ¼ horsepower
  • A 25-foot cord is provided with the machine
  • No oil is needed to run the machine
  • Weighs under 3 pounds
  • It is completely submersible
  • You can manually control the shutdown system
  • It can collect 1/8 inches deep water
  • Gives of regular and stable discharge speed even in winters

Conclusion & FAQ for Pool Cover Pump

Which is the best pool cover pump top go for?

Most contemporary automatic pool cover pumps are a reliable tool to maintain your pool in all seasons. You should go for a model which has a thermoplastic make and is light in weight. The WAYNE WAPC250 is a good choice as it covers all your needs and also comes with an automatic shutdown system. It has a superior filtration system and comes with a great design as well.

How does a pool cover pump function?

The basic function of pool cover pumps is to clean the surface of a swimming pool but removing excessive water and debris. In winter, and monsoons, pools are not used much, so rainwater and debris can get accumulated easily. Freezing temperatures can also affect the pool water. You don’t have to manually maintain a pool during such seasons if you have a pool cover pump.

Pool cover pumps also come in handy in warm seasons. Due to the heat, the water might tend to evaporate from your swimming pool and a swimming pool cover pump helps in maintaining it properly.

A capacitor motor with a permanent split is the basic motor that is present in all pool cover pumps. The motor is powerful and it ensures a well-balanced working speed so that you don’t have to manually check and reset the speed again and again. Most of the pool cover pumps have a 1-1/4th hose or a garden hose of 3/4th length. It is present on the top and it provides proper vertical or horizontal pumping, as required.

The flow rate of a pool pump’s motor is what determines how good the pump is. The power is measured in Horse Power but checking the flow rate of a pump is more essential than checking the power. The higher the flow rate, the more effective and powerful a pool pump will be. Effectiveness depends on the amount of water (in gallons) that is handled by the pump in each hour. The flow rate of a pump will differ depending on the height difference of its position.

Does the water need to be pumped off the pool cover?

The pool covers found in the market are mostly pretty sturdy and resistant. But too much water on the top of a cover, for long periods of time, can cause damage to the material and in turn. The pool water itself, as it won’t be protecting it anymore.

If your area is prone to a lot of heavy rain, the accumulating water on top of the pool cover can make the cover tear and cause dents. The weight won’t be tolerated by most covers and the whole thing might fall apart. This will cause the pool water to be exposed to dirt and change in temperature. The maintenance and repair and changing the water is a long and expensive process, after that.

Due to these factors, pumping water off the pool cover is an absolute must. It should be done quite often. You can use a garden hose and clean up the water first and then remove the debris manually. Or you can take the water out, scooping some amount at a time, using a bucket. The second method is a good way to remove water off your pool cover if the amount of water accumulated is not much. Using a tool is much faster in most cases when it comes to removing excess water from the top of your pool cover.

How tightly should I place my pool cover?

The pool cover for any swimming pool should be firm. Think of it as a drum. The middle part should not have indentation but it should be tightly and snugly fit around the sides. Fitting a pool cover in the right manner is important or debris will crawl into your pool through the sides. The level of water in the pool should also be kept in check when it’s covered and not in use. If the water level is too high, the cover might bounce off and leave the inner pool water exposed. Too low of a water level will make the pool cover sag. The water levels should be kept just right and constant checks should be done in rainy and hot seasons because the water gets added and evaporated, respectively. The water should be at least at eighteen inches from the pool top. The pool cover will be strained if this is not maintained. The sides and anchors can come off or it can just tear off from the middle. The whole cover could collapse into the pool if either of these things happen.

How to remove leaves and debris from my pool cover?

Whether you have a mesh cover or a slid cover, the process of debris and leaf removal is more or less the same.

The first thing which you have to do is to remove excess water off from the top of the pool cover. If the pool cover top is dry and there are dirt and debris on it, it’s easier to clean it off. You can use a regular long brush, though it will be a little time-consuming. The best thing to use would be a pool cover rake. Please don’t use a regular rake if you don’t want to scratch and poke holes into your pool cover. Special pool cover rakes are made to remove debris. You can also use a leaf blower but do check the pressure as it could blow off or damage the cover itself.

If your area is prone to strong winds with a lot of rain, chances are that the leaves stuck on your pool cover are wet along with accumulated excess water. Don’t use a pump or hose to remove the water directly if the excess water has leaves and other debris mixed in it. Use a pool skimmer. Take of the floating leaves and dirt at first. Use a telescopic pole and attach it to the pool skimmer to get the job done. Clear off the debris and then the water. Now you might find some leaves sticking to the pool cover. This is where you will have to use the pool rake. Gather everything in a place like a mesh bag or rack where the wet leaves can dry off. Then you can put it all in the trash.

How to get rid of the excess water off a pool cover in winter?

As mentioned above in the previous answers, you should always remove dirt, debris, and leaves from the top of your pool cover before you try and remove the excess water. The large chunks of debris need to be out of the way so that the draining process of the leftover water can be done properly. Special pumps are available in the market which aide is specifically removing excess water from pool cover tops. Most of the models which get this job done quickly are a bit on the expensive side. If you go for the less expensive models, make sure you have some extra time on your hands as the amount of time they need to clear the water is longer, as compared to the pricey models. But in both cases, it’s a good choice because doing it manually can be extremely tedious, especially if you have a large pool.

If you don’t have a pump, then you have to manually remove the water. This can be done in the best manner by siphoning off the water from the top using a hose. Flat pools are a bit tough to work on when it comes to removing excess water.

How is water siphoning done with a hose to clear excess water from pool covers?

Basically, you need a tube and containers to clear out the water. The container which takes and collects the water should be placed at a level lower than the rest. The tube should be at a higher elevation which you can do by putting something to sling it over. This will reduce the atmospheric pressure in that region, hence, helping the water to start getting transferred.

The siphon should begin by placing the end of the siphon on the pool cover and the other end into the container. The water must remain inside the hose so that when you take out the tube from the cover, it should not flow back on it. Also, you need to make sure that there are no leaks present. To make sure that the tube doesn’t float up and leak water, put some weight wherever necessary. After the tube is placed at a lower level on the pool cover, remove the finger from the other end and let the water start flowing out on its own. Make sure the container is big enough to take in the collected water. Don’t worry if your pool is at a low level or on a completely flat surface, siphoning will work nonetheless. The end of the tube should be at a lower level and the rest will work out without the need to apply any special pump or electrical connections.

How to use a pump to drain excess water from a pool cover?

As compared to manually removing water from a pool cover, as explained above, using a pump will be much faster and easier. It is easy to set up and use, no matter what model it is.

To start off, connect the hose for discharge to the pump. Some companies sell a hose with the machine itself. If not, you should get one that fits well with the pump that you purchase. You can also go for an adapter to attach to the pump and use it with a basic 3/4th garden hose.

The hose needs to be hooked up to the pump after it’s straightened out. The end of the hose needs to be put in a container to collect the water. Make sure that your hands are dry and plug in the pump top a nearby outlet. You can also use an extension cord if the wire provided is too short. The pump should be placed very close to the puddle of water which requires removal. Even if it is touching the water a bit, it’s alright. This is useful for automatic detection so that the water is removed efficiently. Turn the pump off and let the water drain out and collect in the container. Just make sure that all debris is removed before using this pump. Otherwise clogging will happen and that can damage the pump itself. If you don’t have an automatic pump, manually turn off the power switch and unplug the pump, once all water is removed. Shake off the water and make sure the filters are clean.

It’s always a better idea to store your drainage pump inside your home so that it can be protected from harsh weather conditions. Freezing temperatures and moistures might harm it.

Is a rule pool cover pump submersible?

The answer is- some are submersible and some are not. There are few models that are designed in such a way that they can be submerged completely in a puddle of water which needs to be drained out. Most of these submersible pumps are automated and they can detect the water level on their own.

How to winterize pools which are above the ground?

Winterizing basically means getting your pool ready for cold seasons when pools are usually not used much if at all. Depending on the kind of weather you are about to face, winterizing means, closing off the pool until warmer weather arrives. A pool is ideally closed off if the outside temperature is 65 degrees Fahrenheit or below. If it’s not covered off at that [point, some particular microbes and algae might start living in the pool water.

Start by removing the part of the pools which are present at the sides and corners. These would include pipes, ladders, and filters. Removing everything from the peripheral region is necessary so that the pool can be covered tightly without letting any debris or microbes get in easily. This also will help you increase the life span of the ladders itself as it won’t rust when not in use. Wash and dry off each part and store them properly till they are needed again.

The chemistry of the water needs to be balanced perfectly. You need to test certain factors of the water like the hardness content of the ph. balance and the amount of calcium present. The overall alkaline level of the water also needs to be tested. Using the data, you collect, you would understand what adjustments you can make in order to keep the water’s chemistry balanced during the season when you will not be using the pool. The levels should be at around 7.4 in ph. levels, the calcium levels should around 200 and the alkalinity should not exceed 120 parts per million/ ppm.

Clean the pool well, remove debris and dirt or algae from the water as these could change the chemistry of the water when covered. The water level should be lowered a bit as compared to the usual levels. The water should be right under the grid used for filtration. From the top, it should be around 18 inches away.

These are the measures you need to take before firmly fitting your pool cover on top. Make sure there are no gaps for wind or water or debris to enter. The cover should be secured tightly to endure harsh winds. You can also use an air pillow while installing the pool cover. You can add some extra canvas in parts so that it is protected well in rain and snow as well

The filtration system should be removed. If you don’t know how to do all this, check out some online video tutorials. When you take out each part, make sure that they are dry before you keep them away for storage.

If you have winters with warm spells in between, you should keep an eye on the winterized pool and keep making changes if necessary. Fluctuating temperatures can alter the pool’s chemical condition. So, you need to make sure that its well-balanced and safe for use when time comes.

About the author


Megan is a passionate home innovator with 20+ years of experience in home improvement industry. She works as an assistant in a home improvement store in her city. Creating innovative home solutions is what keeps her active in her "me time".

Leave a Comment